| Products |
3WL
- Electro Hydraulic Operated.
- Scissor Type with multi stage locks.
- MS Tube Fabricated.
- Sliding by Self lubricating Rollers.
- Fitted with Hydraulic Cylinder, Chase clamp & vehicle clamp.
- MS Top/Powder coated.
- Operation done by hand operated
- Lever/Solenoid valve
- Pedal operated lock release.
| Model | 3WL | ||
| Capacity | 800 Kg | ||
| Minimum Height | 230 mm | ||
| Lifting Height | 1700 mm | ||
| Table Length | 1500 mm | ||
| Table Width | 650 mm | ||
| Extra Fitting | Adjustable chassis clamping unit and body clamping unit |
||
| Surface Finish | Powder Coated |
HH-3W
- Hydraulic Operated.
- High grade steel plunger.
- Hard chrome plated plunger.
- Fitted with wiper rings prevents the entry of water during operation.
- MS fabricated top platform.
- Oil tank capacity of 50 ltrs.
| Model | HH-3W | ||
Capacity |
1 Ton | ||
| No. of Piston | 1 | ||
| Lifting Height | 1000 mm | ||
| Oil Required | 50 Litres | ||
| Air Pressure | 9 –12 Kg/cm 2 (Bar) | ||
| Length of Frame | 3000 mm | ||
| Width of Frame | 1550 mm | ||
| Surface Finish | Painting |
BWP
- Electrical operated
- Three plunger operated pump
- Fitted with pressure gauge, water hose & aluminum / brass gun.
- Available in various HP.
| Model | BWP-3 |
| Power | 3 HP / Three Phase |
| Discharge Per Gun | 12 LPM |
| Working Pressure | 28 Bar with Two Gun / 40 Bar with Single Gun |
| No. of Gun | Two |
| Length of Hose | 12 Meter |
| Surface Finish | Painting |
BAC
- Electrical operated
- Single / Two Stage.
- Single / Double cylinder.
- Fitted with standard tank capacity.
- Equipped with electrical motor,
- switch & electrical starter.
- Available in Various HP.
MODEL |
HP |
TANK CAPACITY |
CYLINDER |
WORKING PRESSURE |
DISPLACEMENT |
||
|---|---|---|---|---|---|---|---|
|
|
PSI |
Kg / Cm2 |
CFM |
LPM |
||
Single Stage Compressor |
|||||||
BAC -2/240V |
2.0 |
160 |
2 |
150 |
10.5 |
8.833 |
250 |
BAC -2/440V |
2.0 |
160 |
2 |
150 |
10.5 |
8.33 |
250 |
Two Stage Compressor |
|||||||
BAC -3 |
3.0 |
200 |
2 |
170 |
12 |
11 |
310 |
BAC -5 |
5.0 |
250 |
2 |
170 |
12 |
17.7 |
500 |
BAC -7.5 |
7.5 |
300 |
2 |
170 |
12 |
22.4 |
700 |
BAC -10 |
10 |
500 |
2 |
170 |
12 |
35.38 |
1001.4 |
|
|
 |
BENZEAR Oil collector is used to collect waste oil from Two-Wheeler lift. Fitted with stainless steel tray with preforated filter, easy movable with pivot wheel, capacity of 25 litres & powder coated. |
BENZEARTools trolley is used to store general & special tools.Fitted with 5 drawers of different sizes, central locking, top with divided area, easy movable with pivot wheels & powder coated. |
BENZEAR Oil dispenser is used to pump in engine oil with preset quantity. Fitted with electronic digital meter, pivot wheel, level gauge, capacity of 50 liters, air operated & powder coated. . |
|
|
|
BENZEAR work bench is used as base for repairing the spares. Fitted with 1 drawer, i cup board, stand to hold special tools, SS top & powder coated. |
BENZEAR Chain cleaner is used to clean the chain. Fitted with 2 SS bowls with SS filters. Collecting tray in bottom & powder coated. |
BENZEAR Filter cleaner is used to clean the air filter. Fitted with 3 SS bowls, SS filters & powder Coated. |
 |
 |
|
7. BENZEAR brings pneumatic grease pump
with capacity of 25 kg 7 powder coated. |
BENZEAR brings hand operated grease pump with capacity of 20kg,10kg & 5kg. powder coated. |
BENZEAR brings manual operated workshop press with capacity of 10 ton, multi stage & powder coated. |
COPYRIGHT © 2005-2008 BENZEAR EQUIPMENTS INDIA (P) LTD.This site best viewed in 1024 X 768 Resolution webdesign @ c-wavetech.com |