BENZEAR EQUIPMENTS INDIA (P) LTD - Mfrs of Solution for for Automobile garage equipments, Auto Garage, Two Wheeler Lifts, Three Wheeler Lifts, Four Wheeler Lifts,Material Handling Equipment, Special Purpose Machinery , Automobile garage equipments, Garage Equipments, etc...

Products

FOUR WHEELER GARAGE EQUIPMENTS

TWO POST LIFT

M2PL

Features

Electro Mechanical operated.
Overload safety
Arm locking device.
The lifting is fixed with articulated shorts arms.
The screw rods are lubricated automatically.
The movement is transmitted from one post to another by means of bevel gear

Technical Specification

Model		M2PL
Lifting Capacity		3000 Kg
Lifting Height		1900 mm
Lifting Time		1 Minute (Approx.)
Power Required		3.7 KW (5 HP)
Base Length		3300 mm
Base Height		90 mm
Overall Height of Lift		2675 mm
Vertical Adjustment of Pads		40 mm
Min Height of Pick Up Pads		90 mm
Surface Finish		Powder Coated

FOUR POST LIFT

M4PL

Features

Electro-Hydraulic operated
Automatic locking device for wheel alignment balance
All posts features spring-loaded multi-position locking latches
Two-wire type wire rope
Vehicle can be entered from the rear / forward

Technical Specification

Model		M4PL
Max Lifting Hight		1800mm
Min Lowering Hight		170mm
Lifting Height		50mm
Capacity		4Tone
Motor Power		3HP/3Phs
Length		5205 mm
Width		3010mm
Hight		2235mm

FOUR POST LIFT

E2PL

Features

Electro Mechanical operated.
Overload safety
Arm locking device.
The lifting is fixed with articulated shorts arms.
The screw rods are lubricated automatically.
The movement is transmitted from one post to another by means of chain drive.

Technical Specification

Model		E2PL-3T
Lifting Capacity		3000 Kg
Lifting Height		1900 mm
Lifting Time		1 Minute (Approx.)
Power Required		3.7 KW (5 HP)
Base Length		3300 mm
Base Height		90 mm
Overall Height of Lift		2675 mm
Vertical Adjustment of Pads		40 mm
Min Height of Pick Up Pads		90 mm
Surface Finish		Powder Coated

SCISSOR LIFT

HSL

Features

Electro-Hydraulic operated.
Dual packing hydraulic cylinders.
Minimum installation space required.
Separate control box.
Safety by multi-level brakes

Technical Specification

Model		HSL
Lifting Capacityx		3000 Kg
Lifting Time		60 Sec.
Lifting Height		1900 mm
pit Depth		300 mm
Platform Length		1500 mm
Overall Width		1870 mm
Type of Operation		Electro Hydraulic
Power Required		3 HP / 3 Phase
Oil Capacity		50 Litres
Oil Grade		Hydraulic Oil SERVO 68.

SERVICES HOST LIFT

HH-W

Features

Hydraulic operated
The high grade steel plungers
Hard chrome plated plungers
Wiper rings prevents the entry of water during operation
Handles all type of vehicles

Technical Specification

Model		HH-W4
Capacity		4 Ton
No. of Piston		1
Lifting Height		1500 mm
Oil Required		160 Litres
Air Pressure		9 –12 Kg/cm2 (Bar)
Length of Beam		4550 mm
Beam Size		175 x 85 mm
Surface Finish		Painting

MOBILE SCISSOR LIFT

MSL

Features

Electro-Hydraulic operated
Ideal for body work
Portable & easy installed
Arm locking device
Mechanical safety device
Overload safety device

Technical Specification

Model		MSL
Lifting Capacity		2500 Kg
Lifting Time		30 Sec.
Lifting Height		965 mm
Drive-Over Height		105 mm
Platform Length		1400-1930 mm
Overall Width		1870 mm
Type of Operation		Electro Hydraulic
Power Required		3 HP / 3 Phase
Oil Capacity		35 Litres
Oil Grade		Hydraulic Oil SERVO 68.

PIT TROLLEY

BPT

Features

Pneumatic operated.
Slidable platform.
Minimum installation space required
Easy adjustable jaws.
Safety locks.

Technical Specification


Model	BPT
Capacity	2 Ton
Type of Operation	Pneumatic
Min Height	286 mm
Max Height	646 mm
Pneumatic Stroke	165 mm
Mechanical Stroke	195 mm with 5 Pin Holes
Working Air Pressure	7 Bar
Surface Finish	Painting

GARAGE CRANE

BGS

Features

Hand operated by pumping
Ideal for removing and installing engines from vehicle.
Arm extension can be adjustable accordingly
Easy moveable fitted with nylon wheels

Technical Specification

Model	BGC-1	BGC-2
Lifting Capacity	1000 Kg	2000 Kg
Max Lifting Height	2650 mm	2650mm
Min Lifting Height	500 mm	500 mm
Max Arm Extension with Four Holes	1600 mm	1600 mm
First Hole Capacity	1000 Kg	2000 Kg
Second Hole Capacity	800 Kg	1800 Kg
Third Hole Capacity	500 Kg	1500 Kg
Fourth Hole Capacity	300 Kg	1300 Kg

WASHER PUMP

BWP

Features

Electrical operated
Three plunger operated pump
Fitted with pressure gauge, water hose & aluminum / brass gun.
Available in various HP.

Technical Specification

Model		BWP-3
Power		3 HP / Three Phase
Discharge Per Gun		12 LPM
Working Pressure		28 Bar with Two Gun / 40 Bar with Single Gun
No. of Gun		Two
Length of Hose		12 Meter
Surface Finish		Painting

COMPRESSOR

BAC

Features

Single / Two Stage.
Single / Double cylinder.
Fitted with standard tank capacity.
Equipped with electrical motor,
cut-off switch & electrical starter.
Available in Various HP.

Technical Specification

MODEL	HP	TANK CAPACITY	CYLINDER	WORKING PRESSURE		DISPLACEMENT
MODEL	HP			PSI	Kg / Cm²	CFM	LPM
Single Stage Compressor
BAC -2/240V	2.0	160	2	150	10.5	8.833	250
BAC -2/440V	2.0	160	2	150	10.5	8.33	250
Two Stage Compressor
BAC -3	3.0	200	2	170	12	11	310
BAC -5	5.0	250	2	170	12	17.7	500
BAC -7.5	7.5	300	2	170	12	22.4	700
BAC -10	10	500	2	170	12	35.38	1001.4

WASTE OIL COLLECTOR BOC	PNEUMATIC GREASE PUMP BGPP

BENZEAR brings waste oil collector. It is portable, versatile unit designed to collect oil from the gear box, engine and differential	BENZEAR brings you a complete solutions for greasing requirement In 25kg & 50kg. Fitted with nylon wheels makes easy to portable. It is Air operated.

GREASE PUMP BGPH	TOOLS TROLLEY BTT

BENZEAR brings hand operated grease pump with capacity of 20kg,10kg & 5kg. powder coated.	BENZEAR Tools trolley is used to store general & special tools. Fitted with 5 drawers of different sizes, central locking, top with divided area, easy movable with pivot wheels & powder coated.

WORKSHOP PRESS BWSP	OIL DISPENSER BOD

BENZEAR brings manual operated workshop press with capacity of 10 ton, multistage & powder coated.	BENZEAR Oil dispenser is used to pump in engine oil with preset quantity. Fitted with electronic digital meter, pivot wheel, level gauge, capacity of 50 liters, air operated & powder coated.

<< back